Introduction of Features
track
PROG
Standby mode
●
When the power adapter is connected, the set
enters the standby mode.
➜
Time is displayed.
y
➜
Press y briefly to enter the CD mode.
Note:
– To save the power consumption, it is advised to
switch the system to the standby mode.
Source selection
➜
In the CD mode, press SOURCE (or
TUNER on the remote control) to switch to the
Radio mode.
➜
In the Radio mode, press SOURCE or (CD
on the remote control) to switch to the CD
mode.
Dimming the display
BRIGHTNESS
➜
Press BRIGHTNESS to select half or full
brightness or switch off the backlight for the
LCD.
12
B R I G H T N E S S
C O N T R O L
SHUFFLE
REPEAT ALL
C D
VOLUME
MODE
DBB
ON
SOURCE
CD
PROGRAM SHUFFLE
REPEAT
TUNG / TRACK
VOLUME
DBB
Notes:
– When the LCD is dark, pressing any contact key
will activate the full brightness.
– The LCD will go dark again in 10 seconds.
TIME SET
➜
Press y to enter the clock mode.
➜
Press TIME SET to enter the clock setting
mode.
HOUR
➜
Press HOUR to set the hours.
MINUTE
➜
Press MINUTE to set the minutes.
CD
ÉÅ
➜
Press ÉÅ to start or interrupt playback.
S T
➜
S T
Press
briefly to select a desired
track.
➜
S T
Press and hold
backward/forward.
Ç
➜
In the playback mode, press to stop the disc.
TUNER
BRIGHTNESS
PRESET
MUTE
to search