Clip Playback Controls; Adjusting The Volume - Canon 3794C002 Instruction Manual

Clip Playback Controls

The following playback types are available using the joystick and onscreen joystick guide. You can press the
DISP button to show/hide the joystick guide.
Playback type
1
Fast playback
Frame advance/reverse
Skip to the beginning of the next
clip
Skip to the beginning of the
current clip
Skip to the previous clip
1
You may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture.
2
The speed indicated on the screen is approximate.
NOTES
• There is no audio during any of the playback types listed in the previous table.
• You can press the Ò button during fast playback to return to playback at normal speed.

Adjusting the Volume

You can use headphones or the built-in speaker to listen to the audio during
normal playback. When you connect headphones to the × (headphone)
terminal, the speaker will be muted. The audio signal will also be output from the
SDI OUT terminal, MON. terminal and HDMI OUT terminal.
¡
1 Select > [
Volume].
2 Select the desired level.
NOTES
• For details on changing the audio channel, refer to
• If you set an assignable button to [Headphones +] or [Headphones –] (A 121), you can press the button to
adjust the headphone volume without using the menu.
During playback, push the joystick up or down.
Repeat to increase the playback speed to approximately 5x  15x  60x the normal speed
During playback pause, push the joystick up or down.
During playback, push the joystick right.
During playback, push the joystick left.
During playback, push the joystick left twice.
Audio Setup] > [Headphone Volume] or [Speaker
Operation
Audio Output
(A 153).
Playback
2
.
×
(headphone)
terminal
137