Panasonic WH-ADC0309K6E5 Operating Instructions Manual page 34

Menus
For installer
Menu
SG ready input control for
bivalent system follow below
input condition.
SG signal
Vcc-bit1 Vcc-bit2
Open Open
Short Open
Open Short
Short Short
To do settings related to
electricity and boiler so that unit
is able to determine whether
to operate heat pump or boiler
at a particular period depends
on operating cost of both heat
sources. These settings are
electricity price, boiler price,
season, schedule etc.
34
Default Setting
0:30
Control pattern Advanced parallel DHW Yes
• DHW Tank is activated only after selecting
"Yes".
0:30
Yes SG ready
Operation pattern
Heat Pump OFF,
Boiler OFF
OFF
Heat Pump ON,
Boiler OFF
Heat Pump OFF,
Boiler ON
Heat Pump ON,
Boiler ON
Yes Smart
OFF
Yes Smart After selecting for the external pump Energy price
- Select Electricity to set on electricity price.
- Select Boiler to set on boiler price and its
effi ciency.
Setting Options / Display
Delay timer to stop
the bivalent heat
source
(in hour and minutes).
Delay timer to start
the bivalent heat
source
(in hour and minutes).
Option to set external
pump either ON or
OFF during bivalent
operation. Set to ON
if system is simple
bivalent connection.
Option to set external
pump either ON or
OFF during bivalent
operation. Set to ON
if system is simple
bivalent connection.
Bivalent connection
Energy price
Select
10:34am,Mon
Electricity
Boiler
Confirm