Removal steps
Memory module under the keyboard
For access, remove these FRUs in order:
• "1020 Keyboard" on page 65
• "1030 Service bracket" on page 67
Removal steps
When installing:
• Insert the notched end of the memory module into the memory slot. Press the memory module in firmly,
and pivot it downward until it snaps into place. Ensure that the memory module is firmly installed in the
slot and does not move easily.
• Memory module replacement might cause memory retraining during POST. When memory retraining
occurs, the screen cannot display the progress information and might be blank. You might see the LED
70
P16 Gen 1 Hardware Maintenance Manual