Table of Contents
Advertisement
en Familiarising yourself with your appliance
the optimal time to place your food in the cooking
compartment is as soon as the entire line has
turned red.
With set levels such as grill settings, the heating line
turns red immediately.
The heating line does not appear when using the
microwave.
Symbols
Different symbols may appear on the display.
Symbol
4.7 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Shelf supports
The rails in the cooking compartment enable you to
place accessories at different heights.
→ "Accessories", Page 12
Your appliance has three shelf positions. The shelf pos-
itions are numbered from bottom to top.
You can remove the rails, e.g. for cleaning.
→ "Rails", Page 27
10
¡ Residual heat indicator
Name
Home Connect
Home network
Home Connect server
Remote start
Remote diagnostics
Lighting
One or more oven lights illuminate the cooking com-
partment.
When you open the appliance door, the light in the
cooking compartment switches on. If the appliance
door remains open for longer than 15 minutes, the light
switches off again.
For most operating modes, the lighting is switched on
during operation. The lighting switches off again when
the operation ends.
Cooling fan
The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.
ATTENTION!
Do not cover the ventilation slot above the appliance
door. The appliance overheats.
▶
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
Appliance door
If you open the appliance door during operation, the
operation stops. When you close the appliance door,
the operation continues automatically.
In microwave mode, when you close the appliance
door, you have to press to continue.
When the appliance is switched off, the display ring
shows the residual heat in the cooking compart-
ment. As the residual heat dissipates, the display
ring gets darker before eventually disappearing
completely.
Use
¡ Home network and Home Con-
nect server connected
¡ The number of lines shows the
signal strength of the home net-
work
→ "Home Connect ", Page 21
Home network not connected
→ "Home Connect ", Page 21
Home Connect server not connected
→ "Home Connect ", Page 21
Remote start activated
→ "Home Connect ", Page 21
Remote diagnostics activated
→ "Home Connect ", Page 21
Ensure that the ventilation slots are unobstructed.
Advertisement
Table of Contents
