Table of Contents
Advertisement
Installing the WLAN Card
1
Insert the WLAN card in its slot on the computer.
2
Route the antenna cables through the routing channel and connect them to the WLAN card.
3
Align the shield and tighten the M2.0x3.0 screw to secure the WLAN card to the computer.
4
Install the:
a
base cover
b
battery
c
battery cover
5
Follow the procedures in
Coin cell battery
Removing the coin cell battery
1
Follow the procedures in
2
Remove the:
a
battery cover
b
battery
c
base cover
3
To remove coin cell battery:
a
Disconnect the coin cell battery cable from the computer [1].
b Pry and lift the coin cell battery from the computer [2].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
17
Advertisement
Table of Contents
