Philips MAT972 Owner's Manual page 18

Step 2 Connecting the Antenna/Cable TV Signal, a
Cable Box (or Satellite Box), or a VCR (continued)
OPTION C
If you have a Cable Box only (no VCR), choose this option.
1
Connect the Cable TV signal to the In jack on your Cable Box.
2
Connect a Coaxial Cable to the Out jack on your Cable Box and to the Cable
In jack on the back of the Internet Terminal.
Go to step 3 - Connecting the IR Blaster.
Phone
OPTION D
If you have a VCR only (no Cable Box), choose this option.
1
Connect the Antenna or Cable TV signal to the Antenna In jack on your VCR.
2
Connect a Coaxial Cable to the Antenna Out jack on your VCR and to the
Cable In jack on the back of the Internet Terminal.
Note: Control your VCR using the Internet Terminal's remote control, and
set a recording using the TV Planner. Details are on page 34.
Set the VCR's 3/4 switch and the Internet Terminal's 3/4 switch to the same
channel, then set the TV to the same channel.
Go to step 3 - Connecting the IR Blaster.
Audio
Phone
IR Blaster Mic R
Printer Port
Coaxial Cable
Audio Video
In
IR Blaster Mic R L
Printer Port
S-Video
Out
Cable TV signal
OUT
IN
Cable Box
Coaxial Cable
Video
In
In
w e b e y e
Cable
L
Out
S-Video
AC Input
Channel
Out 3 4
Antenna or Cable TV signal
IN
ANT. IN
AUDIO VIDEO
Video
OUT
OUT
Cassette
Recorder
In
w e b e y e
Cable
Out
AC Input
Channel
3 4
18