JVC HR-S8007UM Instructions Manual page 75

9
Return to normal screen
Press PROG or OK.
"PROGRAM COMPLETED" appears on the
screen for about 5 seconds, then normal screen
appears.
• If "PROGRAM NOT COMPLETED PROGRAM
OVERLAP" appears, you have another program
overlapping the program you have just made.
The Program Check screen appears and
conflicting programs will start blinking.
You can now correct the conflicting programs.
See "When programs overlap each other" on
page 29.
0
Engage timer recording standby mode
Press ‰ ‰ ‰ ‰ ‰ .
The VCR turns off automatically and "‰" is
displayed on the front panel display.
To timer-record daily (Monday–Friday) or weekly
serials
Press DAILY (number "8") or WEEKLY (number "9")
anytime during steps 3 through 8.
"DAILY" or "WEEKLY" appears on the Program screen.
● Pressing the button again makes the corresponding
indication disappear.
To use the VCR while it is in timer recording standby
mode
Press ‰ ‰ ‰ ‰ ‰ to cancel the timer recording standby mode,
then press to turn on the VCR.
DO NOT forget to put the VCR into timer recording
standby mode again by pressing ‰ ‰ ‰ ‰ ‰ after you use the
VCR; otherwise, you cannot record the broadcast you
want.
● When "AUTO TIMER" (
timer recording standby mode is automatically
engaged when the VCR is turned off. It is temporarily
canceled when the VCR is turned on. You do not have
to press ‰ ‰ ‰ ‰ ‰ to engage or disengage the timer recording
standby mode.
Downloaded from: https://www.usersmanualguide.com/
pg. 31) is set to "ON", the
NOTES:
● In case of a power failure after programming, the VCR's
memory backup keeps your selections (if the lithium battery is
not exhausted).
● Programs that start after midnight must have the next day's
date.
● After timer recording is completed, the VCR turns off
automatically.
● You can program the timer recording while a regular
recording is in progress; the menu screens will not be
recorded.
● If the tape reaches its end during timer recording, the cassette
is automatically ejected.
● To timer-record cable channels, be sure to keep the cable box
turned on with the correct channel selected.
27
EN