Dell Precision 5480 Service Manual page 68

Table 13. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
Wake on LAN
Wake on LAN
Auto on Time
Intel AMT Capability
Enable Intel AMT Capability
Diagnostics
OS Agent Requests
Power-on-Self-Test Automatic
Recovery
Power-on-Self-Test Automatic Recovery
Table 14. System setup options—Keyboard menu
Keyboard
Fn Lock Options
Lock Mode
Keyboard Illumination
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on
Battery
Device Configuration Hotkey Access
Table 15. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings
68 BIOS setup
Displays the Service Tag of the system.
Create a system Asset Tag.
Enable or disable the wake on AC option.
By default, the option is disabled.
Enable or disable the system to power on by special LAN signals when it
receives a wakeup signal from the WLAN.
By default, the Disabled option is selected.
Enable to set the system to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
By default Restrict Preboot Access option is enabled.
By default OS Agent Requests option is enabled.
By default Power-on-Self-Test Automatic Recovery option is enabled.
By default, the Fn lock option is enabled.
By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F2 keys scan the code for their secondary functions.
Enable to change the keyboard illumination settings.
By default, the Keyboard Illumination option is disabled.
Set the timeout value for the keyboard backlight when an AC adapter is
connected to the system.
By default, the 10 seconds option is enabled.
Set the timeout value for the keyboard backlight when the is running only on
battery power.
By default, the 10 seconds option is enabled.
Manages whether you can access device configuration screens through
hotkeys during system startup.
By default, the option is enabled.
Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.