Table of Contents
Advertisement
as the shift position and jet thrust nozzle trim
angle.
1
1 Shift indicator
2 Watercraft information
3 Trim indicator
The display units of the multifunction display
are selected according to the display units of
the digital speedometer. (To change the dis-
play units, see page 40 for digital speedome-
ter display selection procedures.)
When "km/h" are selected as the display
units of the digital speedometer, values are
shown in kilometers/liters/degrees Celsius.
When "mph" are selected as the display units
of the digital speedometer, values are shown
in miles/gallons/degrees Fahrenheit.
EJU43180
Shift indicator
This indicator shows the reverse gate shift
positions: "F" (forward), "N" (neutral), and "R"
2
3
Instrument operation
(reverse). (See page 31 for shifting proce-
dures.)
1
1 "F" (Forward position)
1
1 "N" (Neutral position)
1
1 "R" (Reverse position)
EJU43190
Trim indicator
This indicator shows the trim angle of the jet
thrust nozzle. One of the two upper display
segments will be shown when the trim angle
is increased, and one of the two lower display
segments will be shown when the trim angle
45
Advertisement
Table of Contents
