Control Elements And Display; Button Functions; Start-Up And Operation; Calling Up The Installer Level Menu - Vaillant VED/8 Operating Instructions Manual

4.4 Control elements and display

max. 42 °C
– +
1 Information
/menu item
2 Selected water
temperature,
available menu
items, selection
options

4.5 Button functions

Button as- Function
signment
+ and − – Setting the domestic hot
water temperature
– Changing the set value
▲ and ▼ – Scrolling in the menu
+ and − at the – Activating and deactivat-
same time for ing the button lock
longer than
three seconds.
+ and − briefly – Temporarily activating the
at the same comfort temperature
time
– Calling up the menu
MEMO and
eco at the
same time
– Calling up saved temper-
MEMO
ature values
– Activating/deactivating the
eco
eco function
– Resetting the consump-
Reset
tion values
← – Going one selection level
higher
– Going one selection level
OK
lower
– Confirming the setting
– Saving desired temperat-
Saving
ure
16
1
°C
2
3
MEMO eco
4
3 Current assign-
ment of the se-
lection buttons
4 Selection but-
tons
The current function of the buttons is
shown in the display.
You must always confirm a change to a
value. Only then is the new setting saved.
You can use ← to cancel a process at any
time.
The appendix contains an overview of the
end user level menus.
End user level menu overview
(→ Page 19)

5 Start-up and operation

5.1 Calling up the installer level
menu
▶
Press and hold MEMO for longer than
three seconds.
Installer level menu overview
(→ Page 19)

5.2 Connecting the remote control

The remote control included in the scope
of delivery is connected to the product at
the factory. You can connect up to three
further remote controls to the product
at the same time. As soon as a remote
control is connected to the product, it ini-
tially adopts the settings from the product.
The settings can then be changed at the
remote control and on the product.
▶
Ensure that the remote control is ready
for operation (batteries are inserted and
the housing is night closed tightly).
▶
Press any button on the remote control.
▶
Press Start on the remote control.
◁
The product's display shows a re-
quest to connect.
▶
Confirm the connection on the product's
control panel.
▶
Confirm the connection to the remote
control.
◁
Both displays switch to the temperat-
ure display.
Operating instructions 0020288447_01