Related Manuals for Iridium LED WASH PRO 44WS 44x20W
Summary of Contents for Iridium LED WASH PRO 44WS 44x20W
- Page 1 LED WASH PRO 44WS 44x20W CODE 104260 Importateur GEMAR – LUMITEC 13 Rue Alfred Kastler 67850 HERRLISHEIM...
-
Page 2: Product Overview
Connection Introduction Packaging:Thanks for your purchasing the LED WASH PRO 44WS. All the lights have been checked and are in excellent operating condition. Please check the shipping carton first,because there may be damage occurred during the shipment.Then check the lights carefully and be sure that the lights is intact and works normally.In the event damage has Master / Slave connection been found, spare parts are missing or the lights works abnormally,please contact us for... -
Page 3: Cable Connectors
CABLE CONNECTORS Cabling must have a male XLR connector on one end and a female XLR connector on the other end. DMX connector configuration GROUND caution:Do not allow contact between the ground and the fixture’s chassis ground. Grounding the POWER IN DMX IN MENU ENTER DOWN DMX OUT... - Page 4 209.91 ACCESSORIES...
- Page 5 DMX 9 channel channel value function 0 - 255 Master dimmer Features 0 - 255 Strobe 0 - 255 OPTICS 0 - 255 green ● Light Source: 44*20W, 4 in 1 RGBW LEDs 0 - 255 blue ● Lens: 20° , 40° white 0 - 255 0 - 255...
-
Page 6: Dmx Control Mode
DMX control mode Displayer introduction DMX 2 channel channel value function 0 - 255 72 color 0 - 255 11 kinds of white DMX 3 channel channel value function 0 - 255 0 - 255 Saturation 0 - 255 Value(brightness) DMX 4 channel channel value... -
Page 7: Programme Menu
Programme Menu AUTO-In this menu, you can select your desire AUTO mode and adjust the running speed. 1. Press “ENTER” button and then UP or DOWN button until “AUTO” is showed. 2. Press “ENTER” button, and “SPEED” or “AUTO MODE” will be showed. Then press ENTER,and you can see two items as below: ADDRESS 1) SPEED - You can select your desired speed in this menu. -
Page 8: Operation
Upload Operation RP-01 Edit Mode DMX-In this menu,you can connect several pieces of lights with DMX cable and control them with control console. RP-11 1. Press “ENTER” button and then UP or DOWN button until “DMX ” is showed. 2. Press “ENTER” button, and “CHANNEL” or “ADDRESS” will be showed.Then press ENTER. Custom Mode 1) “Channel [xx]”...