3. Remove the
base
cover.
4. Remove the battery.
5. Remove the speaker.
6. Remove the
memory
module.
7. Remove the
DC-in
.
8. Remove the
WLAN
card.
9. Remove the
system
board.
NOTE:
System board can be removed with heatsink assembly attached.
10. Remove the
coin cell
battery.
Steps
1. Lift the latch and disconnect the backlit cable and the keyboard cables from the connectors on the touchpad.
2. Remove the 18 (M2x2.5) screws that secure the keyboard to the palmrest [1].
3.
NOTE:
The touchpad FFC covers one of the screws that secure the keyboard assembly to the palmrest.
Remove the keyboard away from the computer [2].
Disassembly and reassembly
87