Table of Contents
Advertisement
16
ASSEMBLING AND PREPARING
Mounting on a table
Lift and tilt the TV into its upright position on a
1
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
Connect the power cord to a wall outlet.
2
CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
(Only 32/42/47LS669*, 32/42/47LS679*
32/42CS669*)
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
Adjusting the angle of the TV to suit view
(Only 32/42/47LS669*, 32/42/47LS679*
32/42/47CS669*)
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20
(Only 42/47/55LM610*)
Swivel 10 degrees to the left or right and adjust the
angle of the TV to suit your view.
10
CAUTION
When adjusting the angle of the product,
watch out for your fingers.
- Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
(Only 42/47/55LM610*)
<Rear>
20
10
<Front>
Advertisement
Table of Contents
