QSG_VOIP841_USA mit Belt clip.qxd
20.01.2007
21:12
What's in the box
Two 750mAh
AAA NiMH
Power supply for
batteries
charger
Handset
Battery door
Charger
Belt clip
Line cord
Ethernet cable
(blue cable)
What e e lse w w ill y y ou n n eed
Internet connection (high speed
●
Internet connection)
A Skype account
●
Internet connection with an
●
ADSL/Cable modem router or a
router connected to an ADSL/Cable
modem. Need at least one Ethernet
LAN plug available.
A telephone line
Seite 1
1
Connect
A
Connect to main supply
Power supply for base
B
Connect the Ethernet cable
Base station
C
Connect the line
Quick start
User manual
guide
on CD
D
Connect the charger
2
A
Insert the plug of the base power
●
adapter into the socket on the
side of the base unit.
Plug the base power adapter into
●
your power outlet.
Place the 2 rechargeable NiMH
●
Connect one end of the Ethernet
●
AAA batteries, observing their
cable to the Ethernet socket on
polarities, into the battery
the side of the base unit.
compartment on the handset.
Connect the other end of the
●
Slide the battery door firmly into
●
ethernet cable to an available
place.
ethernet LAN plug of your
ADSL/modem (or a router
connected to Internet).
Connect the telephone line cord to
●
C
the phone socket on the side of the
At first start up, you will be asked
base unit and the wall phone
socket.
to set the language, accept an agree-
ment, select the country where the
If using ADSL subcription, an
phone is to be used and set the
ADSL filter should be inserted
area code.
between the phone plug and the
Set the display language:
wall socket.
Scroll
●
want.
Insert the plug of the charger
Press
●
●
power adapter into the socket on
the bottom of the charger.
Review the agreement
Plug the power adapter into your
●
Press
●
power outlet.
through the agreement.
Press
●
agreement and proceed.
Install
Insert batteries
Charge handset
B
Before first use, put the handset
●
on the charger and charge
batteries for 14 hours.
Settings before first use
Select your country:
Scroll
to your country name.
●
If you don't see your country name,
select "OTHERS" on the bottom of the
list and enter your international calling
code (i.e. "1" for Canada or "61" for
Australia), see section "8.10 Country
codes list" in the user manual.
to the language you
Press
Select
to confirm.
●
Set your area code:
Select
to confirm.
Enter the area code.
●
Area code is depending of the country,
if you are not using area code press
(Up or Down) to scroll
OK
.
Use
Clear
to correct typing
Accept
to accept the
errors.
Press
OK
to confirm.
●
14