Operating Procedure - Siemens LC359KA70 Instructions For Use Manual

Operating procedure

To activate the functions, simply tap the
buttons. If the buttons are pressed for too
long, no function is activated.
The most effective method of removing
vapours produced during cooking is to:
Switch the ventilator ON
as soon as you begin cooking.
Switch the ventilator OFF
a few minutes after you have finished
cooking.
Acoustic signal:
When a button is pressed, this is verified
by an acoustic signal.
Switching the fan ON
Press the + button.
Setting the required fan speed:
Press the + button.
The fan speed is increased by one step.
Press the – button.
The fan speed is reduced by one step.
Switching the fan OFF:
Press the button.
Or:
Keep pressing the – button until the fan
switches off.
Intensive setting:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
Keep pressing the + button until a
appears in the display.
If the intensive setting is not cancelled by
hand, the fan will automatically switch
back to step after 10 minutes.
}
Fan follow-on:
Press the button.
!
The fan continues to run at step
10 minutes, and at the same time a dot
flashes in the display. After this period
the fan switches off automatically.
Lighting:
The light can be switched on at any
time, even though the fan is switched off.
Querying the selected operating mode:
The extractor hood must be connected and
switched off.
When the button – is pressed twice
(within 1 second), the
if the hood has been set to exhaust air
C
mode, the symbol is indicated if the hood
has been set to circulating air mode.
ç
for
|
~
symbol is indicated
13