Metal cut-off grinder
WARNING! TOXIC FUMES!
►
Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area.
Original accessories/auxiliary
equipment
■
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury.
Before use
Setting up the appliance
Fix the appliance using suitable bolts (not included
in delivery) to a flat, stable base. Use the drill holes
for this purpose. Ensure that a mains socket is
within easy reach.
NOTE
►
In exceptional cases you can position the
baseplate for this process on a solid support.
Removing / inserting transport
safety devices
Removing transport safety devices
♦
Apply a little pressure to the handle
the transport safety device
unit
can now be moved upwards.
Inserting transport safety devices
♦
Press the handle
transport safety device
The motor unit
is now fixed.
NOTE
►
Use the transport safety device for transport-
ing the appliance. Carry the appliance by its
integrated carrying handle
PMTS 180 A1
and pull
out. The motor
downwards and push the
into the appliance.
.
14a
Operation
Switching on and off
■
Direction of rotation of the tool!
■
Insert the plug into a mains power socket.
Switching on:
♦
Press the ON/OFF switch
pressed.
Switching off:
♦
Release the ON/OFF switch
Setting the cutting depth
WARNING! RISK OF INJURY!
►
Always remove the power plug from the
wall socket before carrying out any work on
the appliance.
♦
Adjust the screw on the cutting depth adjust-
ment
with the aid of the supplied hex key
(small)
.
♦
Test the cutting depth by lowering the motor
unit.
Changing the cutting disc
WARNING! RISK OF INJURY!
►
Always remove the power plug from the
wall socket before carrying out any work on
the appliance.
►
Allow the cutting disc
before you touch it
►
Check the cutting disc
damaged or damp, and it should have no
cracks. Otherwise, it could break during
use and cause injuries.
NOTE
►
Only use cutting disks which comply with the
performance data stated in this manual.
♦
Undo the mounting screws
plied hex key (small)
protective cover
♦
Swing the pendulum cover
and hold it firmly in place with your hand.
and keep it
.
to cool down
. It should not be
using the sup-
, in order to remove the
.
back completely
GB │ MT
│
9
■