Cloning Procedures; Exporting A Clone File - LG Pro:Centric 55UV970H Setup Manual

Cloning Procedures

Cloning typically refers to the process of using a Master TV Setup to configure a Target TV. This
section describes how to save (export) a Master TV Setup and then transfer (import) it to a Target
TV using a USB memory device / Clone (.tlx) file.
You can also create an FTG Configuration (.tlx) file using the Cloud Configuration Tool and then
use the Import Clone File procedure to transfer the configuration to Target TVs. Refer to "Creating
an FTG Configuration File" on pages 51 to 53, as necessary.

Exporting a Clone File

This section describes how to use the TV Manager "Export Clone File" option to export Master TV
Setup configuration to a USB memory device / Clone (.tlx) file.
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• If applicable, complete the Custom Master TV Setup procedure (see pages 41 to 43).
• If you would like the Target TV(s) to remain in Pass-through Mode or Application Tuning Mode,
as applicable, after the Clone file is imported, ensure the Master TV does not have an auto-
tuned/edited channel lineup; otherwise, importing the exported file will result in the Target TV(s)
being configured for FTG Mode via CPU.
• If you intend to use the TV's Zoning feature(s), make sure to set the appropriate TV Zone #
and/or Wi-Fi Zone # as described in Reference section, "Using the TV's Zoning Features,"
BEFORE performing the procedure below. Also, for Wi-Fi Zoning in particular, the TV's wireless
network connection settings should be configured in the IP Environment Menu before exporting
is initiated.
• It is not possible to clone a Master TV's clock. Either set a Target TV's clock manually, or use
the Auto Clock setting in the TV setup menus.
• Since the Export Clone File process retrieves the channel lineup from the CPU, if the TV is
currently in FTG Mode via EBL (FTG Channel Map resides in EBL), it is not possible to export
an FTG Channel Map.
Caution: Do not unplug the TV power cord or remove the USB memory device while
exporting is in progress, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
Export Clone File Procedure
1. Ensure the Master TV is set up completely and turned ON.
2. Insert the USB memory device into either of the USB ports on the Master TV.
3. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in
Pass-through Mode) or the Function Menu (TV is already in FTG Mode).
4. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the
screen, select the All Settings
menus.
44
menu icon and press OK to access the advanced TV setup
(Continued on next page)
206-4327