Panasonic KX-NS300 Programming Manual page 15

Table 2 (Option mode for RU/UC model)
[Example of Entering Characters]
To enter "Ann":
A
2
Note
•
To erase the character on the cursor, press CLEAR.
•
To move the cursor to the left, press
•
To move the cursor to the right, press
button consecutively (e.g., "G" and "I"), you must press this button or the FWD/DND button after
entering the first character.
•
If SELECT is pressed, the characters for each button will be displayed in reverse order.
•
To toggle between Table 1 and Table 2 when using the KX-DT300/KX-DT500/KX-NT300/KX-NT500/
KX-T7600 series, press the leftmost soft button.
n
6
(5 times)
OR
FWD/DND
n
6
(5 times)
.
. When entering two or more characters that use the same
1.1.3 Entering Characters
PT Programming Manual 15