Table of Contents
Advertisement
Chapter 1
LED
Power
DSL
Internet
Wireless 2.4GHz
Wireless 5GHz
WPS
LAN
USB
Note:
1. If the DSL LED is off, check your Internet connection first. Refer to
about how to make Internet connection correctly. If you have already made a right connection, contact your ISP
to make sure your Internet service is available now.
2. If the Internet LED is off, check your DSL LED first. If your DSL LED is also off, please refer to
is ON, check your Internet configuration. You may need to check this part of information with your ISP and make
sure everything have been input correctly.
Status
On
System initialization complete.
System initializing or firmware upgrading is in process. Do not
Flashing
disconnect or power off the modem router.
Power is off. Please ensure that the power adapter is
Off
connected correctly.
On
DSL synchronization is established.
Flashing
DSL synchronization is in progress.
DSL synchronization failed. Please refer to
Off
troubleshooting.
On
The network is available with a successful Internet connection.
No successful Internet connection is available, or the modem
Off
router is operating in Bridge mode. Please refer to
troubleshooting.
On
The wireless 2.4GHz band is working properly.
Off
The wireless 2.4GHz band is disabled.
On
The wireless 5GHz band is working properly.
Off
The wireless 5GHz band is disabled.
Turns On when a WPS synchronization is established and
On/Off
automatically turns Off about five minutes later.
A wireless device is trying to connect to the network via WPS.
Flashing
This process may take about 2 minutes.
On
The corresponding LAN port is connected.
Off
The corresponding port is not connected.
On
USB device is identified.
Flashing
USB device identification is in progress.
Off
USB device is unplugged or identification failed.
Get to Know About Your Modem Router
Indication
Connect Your Modem Router
Note
for
Note 1
for
Note 2
for more information
1. If your DSL LED
4
Advertisement
Table of Contents
