Cleaning Modes - Shark Rocket HV345 Owner's Manual

(Click)
(Click)
1. Insert wand into Zero-M™ Cleaner Head.
2. Insert handheld vacuum into wand.
3. Snap accessory storage clip onto the wand.
4. Store one accessory on top holder and one accessory on
bottom holder.
Ensure all connections click securely into place.
NOTE: Not all accessories are available with all configurations. Please see the enclosed Quick Start Guide for your unit.
Additional accessories can be purchased at sharkaccessories.com.
s h a r kc l e a n . c o m
ASSEMBLY
1
(Click)
3
2
OFF
Slide the Power switch
to the appropriate speed
setting.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, High Pile Carpets.
4
UPRIGHT
To clean floors, place foot on cleaner head and tilt
handheld vacuum back.
NOTE: All accessories attach to either the wand or the handheld vacuum.
SETTINGS
SETTING I
Bare Floor/Small Area Carpets
Rugs The brushroll spins The brushroll spins faster
slowly to clean bare floors to pick up debris below
and delicate area rugs. the surface of your carpets.

CLEANING MODES

ABOVE-FLOOR WITH WAND
Stand the vacuum upright. Step on the foot pedal
and pull the wand up to disconnect it from the
cleaner head.
WAND
ABOVE-FLOOR HANDHELD
Press the WAND RELEASE button and lift the
handheld vacuum off the wand.
SETTING II
s h a r kc l e a n . c o m