Table of Contents
Advertisement
NOTE:
SIM card or SIM tray removal is only available on systems that are shipped with WWAN module. Hence, removing
procedure is only applicable for systems that are shipped with WWAN module.
About this task
The following image indicates the location of the SIM card and provides a visual representation of the installation procedure.
Steps
1. Insert a pin into the hole of the SIM tray and push inward until the tray is released.
2. Slide the SIM card tray out of the slot on the computer.
3. Place the SIM card into the SIM tray with the metallic contact facing up.
4. Align the SIM tray with the slot on the computer and carefully slide it in.
5. Slide the SIM tray into the slot, until it clicks into place.
16
Removing and installing components
Advertisement
Table of Contents
