U-Line U-3045CLRS-00A User Manual & Service Manual page 36

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS •
Use only Clear Ice Machine Cleaner
(80-55667-00), available from u-line.com or
your local dealer. It is a violation of federal law
to use this solution in a manner inconsistent
with its labeling. Use of any other cleaner can
ruin the finish of the evaporator and will void
the warranty. Read and understand all labels
printed on the package before use.
U-Line Clear Ice Machine Cleaner is used to remove lime
scale and other mineral deposits. Refer to the following
steps to initiate the self-cleaning cycle.
!
CAUTION
Never use anything to force ice from the
evaporator. Damage may result.
1. Switch the ice maker
off and allow any ice
to melt off of the
evaporator.
2. Remove all ice from
the storage bin.
3. Remove evaporator
cover.
4. Remove the standpipe by lifting it up while using a
slight back and forth motion to loosen it from the drain
hole. The water in the reservoir will flow down the
drain.
Evaporator cover
5. Re-install the standpipe into the water trough.
Evaporator
Standpipe
6. Clean the Interior Bin as follows:
• Dilute 1-2 oz. of Clear Ice Machine Cleaner into two
quarts of water.
• Using a sponge or cloth, clean interior of ice bin,
tubing and door. This cleaner will remove all mineral
deposits and other contaminants from the surfaces.
• Using a bottle brush, clean out the trough drain tube
and pump tubing where needed.
Brush
7. Switch on unit on by pressing
8. Place unit in cleaning mode. See CONTROL
OPERATION for more detail.
36
• SERVICE
MAINTENANCE
Water trough
.
Cleaning 2