LG HBS-800 User Manual page 6

How to Use
Pairing
- Before using the headset for the first time, you must pair it with a Bluetooth-enabled
handset.
- To pair your headset with an additional handset, the headset must be placed in
Pairing Mode.
- There are 2 Pairing Mode Methods with the HBS-800.
Easy Pairing (First Time Pairing)
1. Move the power switch to the 'ON' side to turn on the HBS-800. When the headset
enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, find the Bluetooth Menu and "search for" or "add" new
devices.
• Select "LG HBS800" from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter "0000" (4 Zeros).
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
• Once pairing has completed successfully, you will hear "Your headset paired.".
4. Some handsets might ask for permission to access the phone's contact list. If you
receive a message from your handset, please select "OK" or "Allow access"
• The HBS-800 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
• With the Power off, press the CALL button and move the power switch to the 'ON'
side at the same time for 2 seconds.
• When the headset enters Pairing Mode, the LED indicator will show a solid blue
light. After the procedure repeat Easy Pairing steps 2 through 4.
4