Advertisement
Battery iD
Traxxas recommended
battery packs are equipped
with Traxxas Battery iD. This
exclusive feature allows
Traxxas battery chargers (sold
separately) to automatically
recognize connected battery
packs and optimize the
charge settings for the
battery. This eliminates
the need to worry over
charger settings and menus
for the easiest and safest
charging solution possible.
Visit Traxxas.com to learn
more about this feature and
available Traxxas iD chargers
and batteries.
4 4
14 • TRX-4
TRAXXAS TQ
RADIO SYSTEM
i
INSTALLING THE BODY
Your TRX-4 1972 Chevrolet K5 Blazer includes an innovative latching
system (patent pending) for securing the body to the chassis (body clips
are not required).
To remove the body for chassis access:
1. Reach beneath the front and rear inner fenders and pull the latches
toward the outside of the truck body to release them.
2. Push up on the latches to fully disengage the latches from the inner
fenders.
3. Lift the body straight up from the chassis. Lift the front and rear of
the body evenly or it may become difficult to remove.
To reinstall the body:
1. Position the body on the chassis. Align the left and right sides with
the rock sliders and the front and rear of the body with the bumpers.
1
2. Press down on the body at each latch location until the latches snap
into place.
Note: To keep the clipless system functioning properly, periodically
inspect and clean the latches in the body and the slots on the inner
fenders. If dirt and grime accumulate on these components, the
clipless system will not operate smoothly.
INSTALLING THE BATTERY PACK
WARNING: Do not pinch the battery wires or
connector.
Install the battery pack with the battery wires
facing the rear of the model. Swing the battery
hold down towards the chassis and snap (lock)
the end into the front hold-down retainer.
Note: The battery hold down can be rotated
on its pivot to accommodate different height
battery packs.
The Traxxas High-Current Connector
Your model is equipped with the Traxxas
High-Current Connector. Standard
connectors restrict current flow and are not
capable of delivering the power needed to
maximize the output of the XL-5 HV. The
Traxxas connector's gold-plated terminals
with large contact surfaces ensure positive current flow with the
least amount of resistance. Secure, long-lasting, and easy to grip, the
Traxxas connector is engineered to extract all the power your battery
has to give.
2
Advertisement
