Universal Audio UA Bock 251 User Manual

UA Bock 251 Microphone
User Guide
Introduction
The UA Bock 251 microphone continues Universal Audio's proud
tradition of timeless craftsmanship. Lovingly handbuilt at the
UA Custom Shop in Santa Cruz, California, your new microphone
is designed to deliver uncompromising quality and a lifetime of
musical inspiration.
This microphone is a multi-pattern tube design of the highest quality.
Offering Omni, Cardioid, and Figure-8 polar patterns, extended
low-frequency response, and high sound pressure level tolerance,
we trust this microphone will become an indispensable part of your
recording studio.
Engineered by David Bock and inspired by the iconic 251, the
UA Bock 251 is ideal for capturing vocals and musical instruments.
Universal Audio, Inc.
Getting Started
Place the UA Bock 251 microphone in its included shockmount on a
stable mic stand. Connect the power supply to AC, then connect the
included six-pin XLR cable from power supply to microphone.
Note that the power supply should be powered off before connecting
or disconnecting the microphone. After switching on the power supply,
allow the tube several minutes to warm up before use.
To adjust the microphone polar response pattern, slide the switch until
the desired setting is visible.
For customer support, visit help.uaudio.com
Get Apollo Interface Presets
UA Bock 251 comes with convenient Apollo Channel
Strip Presets. These downloadable settings for UA's
Apollo audio interfaces give you professional results on
a wide range of sources, instantly. To get your presets,
download UA Connect by scanning the QR code or visit
uaudio.com/mics/presets
www.uaudio.com 4585 Scotts Valley Drive, Scotts Valley, CA 95066