Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sinclair CFO-20P
Summary of Contents for Sinclair CFO-20P
- Page 1 USER MANUAL DEHUMIDIFIERS CFO-20P, CFO-40P...
-
Page 2: Table Of Contents
Content Operation Notices ● The Refrigerant..................1 ● Safety Precautions..................2 ● Operation Area..................3 ● Parts Name.....................4 ● Check Before Operation.................5 Operation Instructions ● Operation Method...................6 ● Drainage Method ..................9 Maintenance ● Clean and Maintenance................12 Malfunction ● Troubleshooting..................15 Error Codes, Technical specifications ............17 ●... - Page 3 Explanation of Symbols Indicates a hazardous situation that, if not avoided, will DANGER result in death or serious injury. Indicates a hazardous situation that, if not avoided, could WARNING result in death or serious injury. Indicates a hazardous situation that, if not avoided, may CAUTION result in minor or moderate injury.
-
Page 4: The Refrigerant
Appliance filled with flammable gas R290. Before install and use the appliance, read the owner’s manual first. Before install the appliance, read the installation manual first. Before repair the appliance, read the service manual first. The Refrigerant To realize the function of the air conditioner unit, a special refrigerant circulates in the system. -
Page 5: Safety Precautions
Safety Precautions ● This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory ormental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the app- liance in a safe way and understand the hazards involved. -
Page 6: Operation Area
Operation Area ● This dehumidifier is intended for indoor applications only. It should not be used for commercial or industrial applications. ● During operation, the nearby enclosed space, such as wardrobe can't be dehumidified. temperature will not below 5°C or above 32°C. -
Page 7: Parts Name
Parts Name Front Side Control Panel Air outlet Cover plate (continous drainge) Air inlet Back Side Fixing hole of power cord Water Bucket Power cord... -
Page 8: Check Before Operation
Check Before Operation aced. Below are the checking steps: 1. Hold the handles on both sides of the water bucket and pull it out following the arrow direction. moved a little after long-time transportation. If it's not placed properly, move it to the correct position by hand. -
Page 9: Operation Method
Operation Method Bucket Full Dehumidify Mode Timer Indicator Indicator Indicator Display Window Speed Indicator Wind Direction Indicator Fixed Water Full Swing Angle Smart Cont Quiet Dry Timer ON/OFF High Med Low Wind Filter Clean Mode Timer Humidity Direc Filter Cleaning Indicator Notes: ●... - Page 10 Humidity Button Press Humidity button to set your required humidity. If hold Humidity button, humidity can be set in 10% increment among 30%-80% circularly. After that, the set humidity will be displayed for 5s. Mode Button Press Mode button can set 4 kinds of dehumidify mode - Smart, Cont., Quiet and Dry.
- Page 11 Other Instructions 1. Alarm Warning If the water bucket is full or the water bucket hasn't been put on the correct position for 3mins, the buzzer will give out sound for 10s for reminding you to empty the water bucket or re-install the water bucket at correct position. 2.
-
Page 12: Drainage Method
Drainage Method Method 1: Drain water through water bucket Notes: ● Do not remove the bucket when unit is in operation or has just stopped. ● Do not use the hose if using water bucket to collect water. When the hose is connected, water will be drained out through it instead of into the bucket. - Page 13 Method 2: Drain water through drain hose This unit is connect with drain outlet. User can purchase the drain hose whose inner diameter is 14mm (length is 1.3-1.5m) and assemble it on the drain adapter to drain condensate water. When assembling the continuous drain equipment, do turn off the unit and pull out the power plug.
- Page 14 3. Insert the drain hose into drainage adapter to make sure the water won't leak out. The horizontal height of drain hose should not be higher than the drain outlet. Do not block the drain outlet to make the condensate water can be drained out smoothly.
-
Page 15: Clean And Maintenance
Clean and Maintenance Warning: ● Before cleaning, turn off the dehmidifier and disconnect the power. Otherwise, it may lead to electric shock. Otherwise it will damage unit's appearance. 1. Grille and Case To clean the case: When there is dust on the case, use soft towel to dust it off;... - Page 16 Every few weeks, clean the bucket to prevent growth of mold, mildew and bacteria. Use soft brush to clean the bucket and then rinse it. CFO-20P 1. Take out the water bucket and then pour out the residual water. 2. Press down 4 buckles around the water bucket. Lift up the drain lid.
- Page 17 Check Before Use-season ● Check whether air outlet is blocked. ● Check whether power plug and power socket are in good condition. ● Check whether drain hose is damaged. Care After Use-season ● Disconnect power. ● Empty the water bucket. Long-time Storage steps below in order to maintain the unit in good condition.
-
Page 18: Troubleshooting
Troubleshooting ● Not all the following problems are malfunctions. Problem Possible Causes ● Unit is operating in an area where temperature is higher than 32°C or lower than 5°C. Controls can not be set. ● Bucket is full. ● Noise will rise if compressor has just started. Noise suddenly rises during ●... - Page 19 ● Dehumidifier can't be started up. Problem Possible Causes Solution ● Check if power is lost. If yes, wait for the power to restore. ● If not, check whether the ● Power is not supplied for power circuit or power socket Power indicator is has been damaged.
- Page 20 Error Codes ● Unit's Malfunction Codes Display Code Malfunction Unit's Possible Causes Name Condition Display Window ● Ambient temperature sensor is loosen or is poorly connected with the terminal of display board. ● Some element of display board Ambient may have been put upside down Temperature and cause short circuit.
- Page 21 Buttons are Overcurrent ● Operation environment invalid. protection condition is formidable high temperature and high humidity. Model CFO-20P CFO-40P 220–240 V~ Rated oltage 50 Hz Rated frequency Power input 360 W (max. 450 W) 670 W (max. 900 W) Dehumidifying (temper.
-
Page 22: Electric Schematic Diagram
Electric schematic diagram The Electric schematic diagram are subject to change without notice. Please refer to which one on the unit. FAN MOTOR HUMIDITY LIQUID LEVEL SENSOR SWITCH YEGN DISPLAY BOARD MAIN BOARD COMP-GL N AC-L1 θ STEPPING TUBE MOTOR TEMP.SENSOR COMP. -
Page 23: Producer, Service, Contact
Producer, service, contact Producer: SINCLAIR CORPORATION Ltd., 1-4 Argyll St., London, UK The device was made in China. Service, authorised representative, contact: SINCLAIR Global Group s.r.o. Purkyňova 45 Brno 612 00 Czech republic Tel.: +420 541 590 140 Fax: +420 541 590 124 info@sinclair-solutions.com...