Advertisement
STEP 5
A. Fasten (6) Right and (6) Left Filter Channel pieces and the Filter Block to the Front Retaining Angle and
Bottom Filter Plate with pop rivets.
B. Fasten (2) Filter Channel Cover sections to the Bottom Filter Plate with sheet metal screws, securing the
bottom of the Filter Channels.
C. Slide Filters down into the filter channels. This does not require any fasteners.
FILTER CHANNEL ASSEMBLY
Lower Holder
Panel
Bottom Filter
Plate
Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: gfcinfo@greenheck.com • Website: www.greenheck.com
4
Model TSU50 Weatherhood Assembly Instructions, Rev. 2, September 2021
Filter Channel
Filter Channel
Cover
Front Retaining
Angle
Contact Greenheck Fan Corporation:
®
Filter Channel
Copyright © 2021 Greenheck Fan Corp.
Advertisement
