Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
cover.
2
Remove the fan.
3
Remove the
wireless
card.
4
Remove the
display
assembly.
5
Remove the
display
bezel.
6
Remove the camera.
7
Remove the
display
panel.
8
Remove the
display
hinges.
Procedure
1
Remove the camera cable and the display cable from the routing guides on the display back-cover and antenna assembly.
2
Lift the camera cable and the display cable off the display back-cover and antenna assembly.
Removing the display cable
computer. After working inside your computer, follow the instructions in
50
After working inside
www.dell.com/
Removing the display cable
99
Advertisement
Table of Contents
