Sony VPL-SW225 Operating Instructions Manual page 11

VIDEO IN
For connecting video equipment with a video output terminal.
Video output
Audio output
Video equipment
Audio cable (Phono plug × 2) (not supplied)
INPUT A
For connecting video equipment with a YP
YP
Video equipment
Audio cable (Phono plug × 2 – stereo mini plug) (not supplied)
INPUT C
For connecting video equipment with an HDMI output terminal.
Video equipment
Notes
• Use HDMI-compatible equipment which has the HDMI Logo.
• Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are
recommended.)
• The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal
or CEC (Consumer Electronics Control) Signal.
Video cable (not supplied)
terminal
terminal
P
B
Component – Mini D-sub 15-pin cable (not supplied)
P output
B R
terminal
Audio output
terminal
HDMI cable
(not supplied)
HDMI output
terminal
output terminal.
R
Connecting the Projector
11