Installation Procedure (Linux) - Agilent Technologies Acqiris U10 Series Manual

b. The installation window will open.
c. Select the option 'U1084A Installation', which will install the software required for your U10xxA
series product, without the Agilent IO Libraries Suite which is not required for these products.
The MD1 Software Package provides a specific fundamental driver (AgMD1Fundamental.dll), which will be
installed in the
C:\Program Files\IVI Foundation\IVI\Bin
driver contained in the previous Acqiris Software Package (AqDrv4.dll), allowing backward compatibility with
existing software applications.
The Soft Front Panel (SFP), device driver and MD1 LabVIEW driver will be installed in the
Files (x86)\Agilent\MD1
The Acqiris LabVIEW driver, Acqiris MATLAB MEX interface, C++ examples and documentation will be
installed in the
C:\Program Files (x86)\Agilent\MD1\U10xx_Digitizers

Installation Procedure (Linux)

The MD1 Software Package provides a specific fundamental driver (libAgMD1Fundamental.so) and a specific
IVI-C driver (libAgMD1.so), which following the procedure detailed below, will be installed in the
folder.
The package also includes the driver which was contained in the previous Acqiris Software Package
(libAqDrv4.so), allowing backward compatibility with existing software applications.
Please refer to the detailed installation instructions contained in the 'README' file, which is available
l
from:
Within the '/Linux' folder of the AgMD1 CDROM (M9210-90007)
o
The driver page of the Agilent Technologies website.
o
Within the downloaded .tar.gz archive package.
o
12
folder.
folder. In addition, it also provides the
Agilent Acqiris U10xx Series Products Startup Guide
C:\Program
folder.
/usr/lib/