Samsung NE470 Installation Manual page 28

Menu Items (some options may be different depending on model, please refer to the set)
To Enter this menu: Press the
To exit from this menu: Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu Item
Hospitality
Hospitality Mode
Mode
SI Vendor SI Vendor
Power On Channel
Power On Channel
Num
Power On Channel
Type
Power On Volume
Power On
Power On Volume
Num
Min Volume
Max Volume
Power On Source
Power On Option
28
English
MUTE → 1 → 1 → 9 → ENTERE buttons in order.
initial Value
Standalone
Select Hospitality mode.
(Interactive
y Interactive mode: TV works with an SI STB or SBB.
for 478
y Standalone mode : TV works alone, without an SI STB or SBB.
models)
OFF
y Interactive mode: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
(Samsung
SeaChange / MDC / Innvue
for 478
y Standalone mode: OFF / Smoovie / SSCP
models)
Set the default values that will be applied when the TV is turned.
y User Defined: Lets you set Power On Channel and Channel Type manually. See Power
Last Saved On Channel and Channel Type below.
y Last Saved: If you select this item, when the TV is turned on, it displays the channel it
was displaying when it was turned off.
... When the TV is turned on, it switches automatically to this channel.
y Select channel band: AIR (analog air band), DTV (digital air band), CATV (analog cable
...
band), CDTV (digital cable band).
y User Defined: Lets you set the Power On Volume manually. See Power On Volume
below.
Last Saved
y Last Saved: When the TV is turned on, it returns to the volume that had been set when
the power had been turned off.
... The TV turns on with this Volume Level in Stand Alone Hospitality mode.
0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
100 The maximum Volume Level the user in Stand Alone Hospitality mode.
TV Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
y Last Option: Returns to its last Power state. If it was in Stand-by, it returns to Standby.
Last Option
If it was on, it turns on.
y Power ON: When the power returns, the TV turns on.
y Standby: When the power returns, the TV enters the Standby mode.
Description