Table of Contents
Advertisement
Serial ATA 6.0Gb/s connectors (SATA6G_1~2)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
6.0 Gb/s signal cables.
Serial port connector (10-1 pin COM)
Connect the serial port module cable to this connector, then install the module to a
slot opening at the back of the system chassis.
M.2 Wi-Fi 2230 connector
This socket connects to an M.2 Wi-Fi
System panel connector (10-1 pin PANEL)
This connector supports several chassis-mounted functions.
TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform
Module (TPM) system, which can securely
store keys, digital certificates, passwords
and data. A TPM system also helps
enhance network security, protects digital
identities, and ensures platform integrity.
LCD panel backlight header (8-pin LCD_BLKT_PANEL)
This connector is for the LCD panel backlight and brightness controls. It enables
the LCD panel backlight, provides backlight control signals, and provides brightness
control signals for the brightness button on the front panel.
LVDS connector (40-pin LVDS)
This connector is for an LCD monitor that supports Low-voltage Differential
Signaling (LVDS) interface.
RTC battery header (2-pin BATT_CON)
This connector is for the lithium CMOS battery.
Panel off header (2-pin PANEL_SW)
This 2-pin header is for connecting a monitor switch that can turn off the LCD panel
display backlight.
Panel voltage selection header
(VCC_PWR_SEL)
Backlight inverter voltage selection header (3-pin BLKT_PWR_SEL)
BLKT_PWR_SEL
12V
(Default)
1-3
19V
device.
2230
+3VSB
S_PCIRST#_TBD
GND
C_PCICLK_TPM
+3V
+3V
VCC_PWR_SEL
1
2
3V
5V
(Default)
Pins
1-2 (Default)
2-3
TPM
F_CLKRUN
F_SERIRQ
F_FRAME#
F_LAD3
F_LAD2
F_LAD1
F_LAD0
PIN 1
3
12V
Setting
12V
19V
ASUS H110S2
Advertisement
Table of Contents
