Accessories; Technical Data; Dimensions - Graco ULTRA MAX 1095 Instructions-Parts List Manual

Accessories

DANGER LABELS
The English language DANGER label shown on
page 4 is also on your sprayer. If you have paint-
ers who do not read English, order one of the fol-
lowing labels to apply to your sprayer. The draw-
ing shows the best placement of these labels for
good visibility.
Order the labels directly from Graco, free of
charge. Toll Free: 1–800–328–0211
Apply other
language here
French 185–955
Spanish 185–962
German 186–042
Greek 186–046
Korean 186–050

Technical Data

Power Requirements . . . . . . . . . . . . . . . . . . .
1 phase, 15A minimum or 4000W generator
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(with latex at 2000 psi (138 bar, 13.8 MPa)
Working Pressure Range 0–3000 psi (0–210 bar, 0–21 MPa)
Cycles/Gallon (liter) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Delivery Rating . . . . . . . . . . . . . .
Tip Size . . . . . . . . . . . . . . . one gun – 0.032; two guns – 0.021
(with latex at 2000 psi (138 bar, 13.8 MPa)
Power Cord . . . . . . . . . . . . . . . . .
Inlet Paint Strainer . . . . . . . . . . . . . . . . .
Outlet Paint Filter . . . . . . . . . . . . . . . . . .
Pump Inlet Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Outlet Size
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filter with standard 3/8 npt(f) to 1/4 npsm adapter 1/4 npsm
Basic Sprayer Wetted Parts:
polyurethane, polyethylene, stainless steel,
PTFE , Delrin
NOTE: Delrin and PTFE

Dimensions

Weight (dry w/o packaging)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120 VAC, 60 Hz,
1.2 HP
193 (51)
1.1 gpm (4.1 lpm)
14 AWG, 3 wire, 15 ft (4.5 m)
16 mesh (975 micron)
stainless steel screen, reusable
60 mesh (238 micron)
stainless steel screen, reusable
3/4 npt(m)
3/8 npt(f)
. . . . . . zinc-plated carbon steel,
chrome plating, leather,
,
V-Max UHMWPE, aluminum,
stainless steel, tungsten carbide
. . . . . . . . . . . . . . . . 107 lb (49 kg)
28.5 in. (724 mm)
25.5 in. (648 mm)
20.5 in. (521 mm)