First Alert / BRK Brands, Inc., could void the user’s authority to operate the equipment. We, First Alert / BRK Brands, Inc. declare under our sole responsibility that the device to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Congratulations on purchasing your First Alert Security Camera product. First Alert has been helping families and businesses stay safe for over 50 years. By having a First Alert Security Camera, you’re taking the first step in protecting your home or business from damage or theft. We’re watching, even when you’re not.
Page 6
GETTING TO KNOW YOUR SYSTEM Remote Control Press to Power the Monitor ON. CH 1 Press to select Channel 1. CH 2 Press to select Channel 2. CH 3 Press to select Channel 3. CH 4 Press to select Channel 4. Press to Exit Menu Menu Press to bring up Menu options or...
SYSTEM SET UP - INSTALLING CAMERA SETTING UP YOUR DW702M SECURITY SYSTEM GENERAL PRECAUTIONS • Use only the power supply provided with the system. • Unplug the power supply when the system is not in use for extended periods. • Do not place any of the equipment near a radiator, vent, or other place where it might be exposed to heat, moisture, dust, vibrations, or strong magnetic fields.
SYSTEM OPERATION CONNECTION GUIDE Connecting the Camera Connect the supplied power adapter (5V) to the power input on the camera. Plug the power adapter into a wall socket. Connecting the Monitor Connect the supplied power adapter (5V) to the power input on the Monitor. Plug the power adapter into a wall socket.
VIEW MODE MENU View Mode Sub Menu Press M from the Main Menu to access the View Mode menu options. The View Mode Screen has three options as follows. • MANUAL – Allows you to control which channel to be displayed; USE CH- & CH+ to move through channels.
RECORDING & STORAGE MENU REC – STORE Sub Menu Press M from the Main Menu to access the REC Store menu options. The Rec Store Sub-menu provides 2 selections: • Rec Files - allows you to view recorded files that reside on the SD card. •...
Page 11
RECORDING & STORAGE MENU Store Format Screen To Format the SD card Note: Formatting should be performed whenever a new SD card is to be used. The formatting process 1. Store Format in the Rec Store Sub screen to bring up Formatting Confirmation screen. Press M to confirm selection.
SYSTEM MENU MOTION RECORD System Menu The System Menu provides 3 options. The options include Motion Record settings, (setting of the system time) Clock setting and Pairing Camera with the system. Motion Record – allows the user to set cameras to record for 5 seconds, 10 seconds, all of the time (on), or No Record (OFF).
Page 13
CLOCK SETTING Clock Setting The clock setting menu allows the user to set the time for the system. To set the system time do the following: 1. Highlight the Clock Setting selection from the Systems Sub Menu and press M. 2.
SYSTEM MENU - PAIRING OPERATION Pairing Camera Sub Menu Press M from the record store submenu. 1. Select camera to pair by highlighting camera channel in RED. Use AN- or AN+ to select camera. 2. Press M to start pairing process. 3.
TECHNICAL SPECIFICATIONS Technical Specifications Camera C5734VD Image Sensor NTSC: 1/4” Color CMOS Horizontal Resolution 420 TVL Active Pixels 649H x 583V Pixel Size 6.0µm x 6.0µm White Balance Auto Signal/Noise Ratio ≤50dB Gain Control Auto Sensitivity 10V/Lux-Sec Lens 3.6 mm Viewing Angle 62º...
TROUBLESHOOTING Troubleshooting Problem Possible Causes Remedies No power supply to camera If camera power status indicator light is off, check power adapter and power cable connection. Channel is not linked up to camera Move the camera closer to the receiver, and connect the camera to the desired System message shows channel.
Product Limited Warranty BRK Brands, Inc., (“BRK”) the maker of First Alert® brand products warrants that for a period of one year from the date of purchase (the “Warranty Period”), this product will be free from defects in material and workmanship. BRK, at its sole option, will repair or replace this product or any component of the product found to be defective during the Warranty Period.