N AT IO N AL G EO GRA P H IC
B IN O C U L A R S
U S ER GUI DE
© National Geographic Partners LLC. All rights reserved.
80-10621
NATIONAL GEOGRAPHIC and Yellow Border Design are trademarks
of the National Geographic Society, used under license.
80-10821
80-10821CP
© Explore Scientific, LLC
1010 S. 48th Street, Springdale AR 72762.
80-00842CP
All rights reserved. Made in China.
80-11032
explorescientific.com | 866.252.3811
80-21040CP
Contents, colors and specifications may vary.
V032022
04
Parts
01. Ocular Lens / Rubber Eyecup
02. Diopter Settings
03. Center Focus
04. Case
05. Objective Lens
MODELS
06. Tripod Adapter Socket (Models will vary.)
80-01632CP
– Neckstrap / Lanyard (Not shown. Models will vary.)
80-11025
– Lens Covers (Not shown. Models will vary.)
80-11840
80-11050
80-11042
WARNING:
TRV1042WP
– SUN HAZARD — Never look directly at the sun with this device.
– The lens contains lead that may be harmful. Wash hands after touching.
Not all models shown.
Binoculars shown are for reference only. Part placements may vary by model.
02
01
03
02
Twisted Eyecup
03
06
04
05
02
01
Rolled Eyecup
03
06
04
05
WARNING:
This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
Eyecup Adjustment
Drawings may not match binocular model.
01
Rolled Eyecup
Twisted Eyecup
Your binocular is fitted with eyecups which can be rolled or twisted up or down
(depending on your model) to optimize the view for your eyes and to exclude
extraneous light. If you are not wearing eyeglasses or sunglasses, keep the eyecups
05
fully extended ("up" position). If you are wearing glasses, roll down the eyecups or
twist them to the down position. This will bring your eyes closer to the binocular's
eyepiece (ocular) lens to ensure you can see the entire image (full field of view with
no "cutoff" or "tunnel vision").
IPD (Interpupillary Distance) Adjustment
The distance or spacing between the center of the pupils, called "interpupillary
distance" (IPD) varies from person to person. To adjust the binocular to match your
eyes, follow these simple steps:
1. Hold your binocular in the normal viewing position. Grasp each barrel firmly.
2. Move the barrels closer together or further apart until you see a single circular
field (don't worry about focus yet).
3. Always re-set your binocular to this position before using it.
Rolled Eyecup