Download Print this page

Cooper Lighting Cirque 4-ADP Specifications

Direct-indirect/ angled direct-indirect

Advertisement

Quick Links

4DP
ø4"
[102mm]
4IP
4ADP
Construction: Extruded aluminum housing.
Nominal 3', 4', 6' or 8' illuminated sections.
End Caps: Die-cast aluminum.
Shielding: Clear ribbed acrylic lens or contoured
baffle.
Electrical: 120, 277, 347 or Universal Voltage
electronic ballast. Fixtures and electrical
components certified to UL and CUL standards.
Finish: Durable, low gloss, white, powder coated
acrylic finish.
Mounting:
Pendant with single stem (standard) or single cable.
Canopy: Round 5" diameter.
R O W C O N F I G U R AT I O N
NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.
ORDERING INFORMATION:
Sample number: 4DP-1T5-ST12-1EB-SI-S26
Series
4=Cirque
Light Output
7"
[178mm]
DP=Direct Pendant
MIN.
IP=Indirect Pendant
ADP=Angle-Direct Pendant
AIP=Angle-Indirect Pendant
Number of Lamps
1=1 Lamp
Lamp Type
4AIP
T8
T5
Pendant Type
ST=Single Stem
Run Length
Overall Nominal Run Length__ft. (Any combination of 8', 6', 4' and 3'
sections)
Voltage
1
1=120V
2=277V
Ballast
EB=Electronic Ballast (Standard)
Switching
SI=Single Switching
Emergency
EM=Emergency Pack (Consult Factory)
Fusing
GLR
GMF
Shielding
S14=Contoured Baffle
1 Due to various constraints, some options may not be combined with others.
2 Available with 7° or earthquake 45° swivel canopy assembly.
(per cross section) (not included)
T5HO
2
SC=Single Cable
3=347V
U=Universal
DB=Dimming Ballast
S26=Clear Ribbed Acrylic Lens
NEO-RAY
CIRQUE
4-AIP
4-ADP
4-IP
4-DP
D I R E C T- I N D I R E C T
A N G L E D D I R E C T- I N D I R E C T
• Direct-indirect and angled
direct-indirect light
distributions.
• Extruded aluminum housing.
• Nominal 3', 4', 6' and 8'
illuminated sections.
• Runs any length of above
component configurations.
• Diffusers – radial baffle
and/or acrylic ribbed lens
• Die cast end caps.
• Custom finishes available by
special order.
COOPER LIGHTING
729

Advertisement

loading

This manual is also suitable for:

Cirque 4-aipCirque 4-dpCirque 4-ip