Recording (Videotapes) 25 - Magnavox 27MDTR10S Owner's Manual

Color tv with built-in vcr/dvd player

Hide thumbs Also See for 27MDTR10S:

Service manual (133 pages)

Table Of Contents

Table of Contents

Place a tape with its record tab intact in the

cassette compartment of the TV/VCR/DVD.

The TV/VCR/DVD power will come on.

If the power is already on and a videotape is in the

unit, make sure the unit is in TV/VCR mode. Press

SELECT so the red VCR/TV light appears on the front

of the unit.

Press SPEED until the desired tape speed (SP

or SLP) appears in the bottom left corner of

the screen. See tape speed details below.

Press CH.

select the channel you want to record.

You cannot change channels during recording. You

can only record and view one TV channel at a time.

Press RECORD once to start recording. The

REC/OTR light will flash on the front of the

TV/VCR/DVD. (If the tape does not have a record

tab, the tape will eject. Insert another tape.)

To pause the recording, press k. To resume

recording, press k again or press RECORD.

To stop recording, press STOP C .

Tape Speeds

This chart shows the recording/playback time for three types

of video cassettes (T160, T120, and T60). There are three

playback speeds: SP, LP, and SLP. A tape will play only in the

speed in which it was recorded. When recording, you can

change the tape speed using the SPEED button. You cannot

record in LP speed on this TV/VCR/DVD.

The slower the speed, the more programming you can fit on

the tape. SLP is the slowest speed.

Cassette type / Playback Time

Tape Speed

T160

2 hrs.

(Standard Play)

40 mins.

5 hrs.

(Long Play)

20 mins.

(playback only)

SLP

(Super Long Play)

8 hrs.

or the Number buttons to

T120

T60

2 hrs.

1 hr.

4 hrs.

2 hrs.

6 hrs.

3 hrs.