Sony XM-8ES Owner's Record page 13

 2-channel input
Set the INPUT MODE switch to "1-2".
INPUT MODE
+ +
1-8 1 3/2 4
1-2/5-6 1-2
INPUT*
CH 1
CH 3
CH 5
CH 7
* Connect to the INPUT/LINE OUT connector using the
connection cable . For details, see "Input Connection"
(page 11).
Notes
• Use speakers with an impedance rating of 2 Ω – 8 Ω for this
connection.
• When connecting the subwoofer to a channel, set the
FILTER to "LP" and the RANGE to "50-500".
When connecting another type of speaker, set the FILTER
and RANGE of the channel to the appropriate settings
according to your needs.
• You can bridge CH 1/2, CH 3/4, CH 5/6, and CH 7/8 of this
amplifier for more powerful output. For details, see
"Bridging the amplifier channels" (page 14).
Car audio or DSP
CH 2
CH 4
CH 6
CH 8
 4-channel input (summing mode)
Set the INPUT MODE switch to "1+3/2+4".
INPUT MODE
+ +
1-8 1 3/2 4
1-2/5-6 1-2
INPUT*
CH 1
CH 3
CH 5
CH 7
* Connect to the INPUT/LINE OUT connector using the
connection cable . For details, see "Input Connection"
(page 11).
Notes
• Use speakers with an impedance rating of 2 Ω – 8 Ω for this
connection.
• When connecting the subwoofer to a channel, set the
FILTER to "LP" and the RANGE to "50-500".
When connecting another type of speaker, set the FILTER
and RANGE of the channel to the appropriate settings
according to your needs.
• You can bridge CH 1/2, CH 3/4, CH 5/6, and CH 7/8 of this
amplifier for more powerful output. For details, see
"Bridging the amplifier channels" (page 14).
Car audio or DSP
CH 2
CH 4
CH 6
CH 8
13
EN