Dell P26S Owner's Manual page 45

Option Description
Default setting: Wake on AC is not selected.
Auto On Time Allows you to set the time at which the computer must turn on automatically. The
options are:
•
•
•
•
Default setting: Disabled
USB Wake Allows you to enable USB devices to wake the system from Standby.
Support
•
Default setting: The option is disabled.
Wireless Radio Allows you to enable or disable the feature that automatically switches from wired
Control or wireless networks without depending on the physical connection.
•
•
Default setting: The option is disabled.
Wake on LAN/ Allows you to enable or disable the feature that powers on the computer from the
WLAN Off state when triggered by a LAN signal.
•
•
•
•
Default setting: Disabled
Block Sleep This option lets you block entering to sleep (S3 state) in operating system
environment.
Block Sleep (S3 state)
Default setting: This option is disabled
Peak Shift This option enables you to minimize the AC power consumption during the peak
power times of day. After you enable this option, your system runs only in battery
even if the AC is attached.
Disabled
Every Day
Weekdays
Select Days
NOTE: This feature is only functional when the AC power adapter is
connected. If the AC power adapter is removed during Standby, the system
setup removes power from all the USB ports to conserve battery power.
Enable USB Wake Support
Control WLAN Radio
Control WWAN Radio
Disabled
LAN Only
WLAN Only
LAN or WLAN
45