Automatic Installation - Philips 20-LCD TELEVISION 20LCD35 User Manual

Automatic installation

Auto programme
Automatic installation
Manual installation
Reshuffle
Language
oœ OK MENU
System System
Storage from
Search
‡
1
MENU
&
Select the TV system.
é
Press the cursor left/right to select the TV
system of the country or part of the
world from where you want to receive the
TV channels.
If you are connected to a cable system,
select the TV system of your country or
part of the world you are now located.
DK: PAL D/K, SECAM D/K (East Europe)
BG: PAL B/G, SECAM B/G
(Europe/East Europe/France)
I: PAL I/II ( U.K./Ireland)
L (if provided) (France)
"
Press the cursor up/down to select
Storage from
'
Press the cursor left/right to select a
BG BG
1
C 15
2%
.
channel number or enter the channel
number with the digit keys from where
you want to start searching for new
channels. If e.g. you want to keep the
channels 1 to 11 stored earlier, enter
channel number 12.
Your TV will search for new channels from
number 12 onwards.
(
Press the cursor up/down to select
.
Search
§
Press the OK key to start Automatic
programming.
All available TV channels are searched for
and stored automatically.
The names of the TV channels are stored
as well if the TV channels broadcast VPS
(Video Programme Service), PDC
(Programme Delivery Control) or
Teletext.
If no name can be assigned to the TV
channel, the channel number only is
assigned and stored as C-channel (V/UHF
01-69) or S-channel (Cable 01-47),
followed by a number.
To stop auto programming, press the
key.
MENU
When auto programming is completed, the
Programme reshuffle
further on.
è
Press the
MENU
want to exit the menu.
menu appears. See
key repeatedly if you
Installation
5