Table of Contents
Advertisement
Notes
Safety
Note on installation
The switching actuator with load detection can be used for fixed installations in interior spaces, for
installations in dry locations within distribution boards or small casings with DIN rail EN 60715-TH35.
Commissioning
Connecting loads to the switching contacts
Note on installation
Maximum current via the load terminals ≤ 20 A
Siemens Switzerland Ltd
Building Technologies Division
International Headquarters
Theilerstrasse 1a
CH-6300 Zug
WARNING
The switching actuator actuator with load detection should only be
installed and put into operation by a certified electrician.
Ensure that the switching actuator can be activated.
Do not open the housing of the switching actuator with load
detection.
For planning and construction of electric installations, the relevant
guidelines, regulations and standards of the respective country are
to be considered.
DS01
Siemens Switzerland Ltd 2019
Subject to change
Cu
0.5 ... 2.5 mm²
Update: http://www.siemens.com/gamma-td
2.5 mm²
10 / 13
January 2019
Advertisement
Table of Contents
