Advertisement
Quick Links
FILTER REPLACEMENT
REPLACE FILTER NOTIFICATION
The power button will flash red when it is time to replace the HEPA-type filter based on the air purifier's hours
of use.
REPLACING THE HEPA-TYPE FILTER
For optimal performance, replace every 12 months under normal usage conditions.
1. Unplug the air purifier and turn
upside down. Turn the filter cover
as indicated to remove.
3. Pull to remove the old filter.
To purchase genuine HoMedics replacement HEPA-type filters, model AP-T10FL, go back to the retailer where you purchased your air purifier,
or visit www.homedics.com (US), www.homedics.ca (CAN).
2. Remove the filter cover and
set aside.
4. Slide the new HEPA-type filter
into the filter cavity.
8
Advertisement
Summary of Contents for HoMedics AP-T10FL
- Page 1 3. Pull to remove the old filter. 4. Slide the new HEPA-type filter into the filter cavity. To purchase genuine HoMedics replacement HEPA-type filters, model AP-T10FL, go back to the retailer where you purchased your air purifier, or visit www.homedics.com (US), www.homedics.ca (CAN).
- Page 2 5. Reinstall the filter cover and turn 6. Plug the power cord into a household electrical outlet. Turn the to the right to lock in place. air purifier on. Press and hold the power button for 3 seconds to reset the indicator.