Sat/Dvd Functions; Tv/Vcr/Input; Setup; Battery Installation - Magnavox MRU2500 User Manual

Button Functions, cont.
DVD Functions
SCAN+ and SCAN- buttons control the speed of Fast
Forward and Reverse Playback respectively.
CHAPTER+ and CHAPTER- buttons respectively locate the
succeeding or preceding Chapters or Tracks on a disc.
SUBTITLE button turns the subtitles on or off.
REPEAT button performs DVD players "A-B Repeat" (or
RPT A.B) function for repeat play of current Chapter or
Track.
INFO/SELECT button brings up DVD Display or Control
Menu for Chapter/Track/Title number, Time remaining/
elapsed indication, system information, etc.
MENU brings up the DVD disc Menu screen - use with the
UP, DOWN, LEFT & RIGHT navigation buttons.
OK button is used for on-screen Menu selection. Note some
DVD players require the PLAY button to be used.
QUIT button is used to Exit or Clear on-screen Menu
displays.
PLAY button is used to start Disc playback and for Menu
selection on some DVD players.
STOP button stops Disc playback.
PAUSE button pauses Disc playback - press PLAY to resume.
INPUT button activates the DVD Player's SETUP Menu.

SAT Functions

GUIDE button displays on-screen Satellite Channel Guide.
CHAPTER+ and CHAPTER- buttons perform the "Page+"
and "Page-" function for on-screen Guide Menus used by
some Satellite systems.
INFO/SELECT button brings up Satellite Display screen for
current Channel and system information.
MENU brings up the Satellite Menu screen - use with the UP,
DOWN, LEFT & RIGHT navigation buttons.
OK button is used for on-screen Menu selection.
QUIT button is used to Exit or Clear on-screen Menu
displays.
INPUT button performs the Satellite TV/SAT function.

TV/VCR/INPUT

When in TV mode the TV/VCR/INPUT button performs the
INPUT source switch function.
When in a mode that has been programmed for VCR the TV/
VCR/INPUT button performs the TV/VCR antenna switch
function.
When in a mode that has been programmed for Cable the TV/
VCR/INPUT button performs the A.B switch function.
When in a mode that has been programmed for SAT the TV/
VCR/INPUT button performs the TV/SAT switch function.
When in a mode that has been programmed for DVD the TV/
VCR/INPUT button performs the DVD Setup function.
6

Setup

Battery Installation

1. On the back of the remote,
push down on the tab and
lift the cover off.
2. Match the batteries to the
+ and - marks inside the
battery case, then insert 2
AAA Alkaline batteries.
3. Press the battery cover
back into place.

Battery Saver

Your remote automatically turns off if the buttons are
depressed more than 30 seconds. This will save your
batteries should your remote get stuck in a place where
the buttons remain depressed (e.g., between the sofa
cushions).

Code Saver

Codes are stored in permanent memory while you are
changing batteries so you will not lose any codes
stored in the remote while you are changing batteries.

Power-On Default

The remote powers on in TV mode.

Code Setup

The CODE SEARCH button is used to setup the
remote. You can either setup the remote using the code
for your brand of product, from the code tables (on
separate sheet), or you can search through the library
of codes until you find a code that works for your
product.
Please refer to "Programming with Code Search" on page
8 for more information on using the code search feature
to learn how to search through the library of codes for
your products.
NOTE: You can store any kind of code under any mode
(except TV). I.E. you can store a VCR code under the
CBL button, or a DVD code under the VCR button, etc.
However, you can only store TV codes under the TV
button.
7