Table of Contents
Advertisement
2.3
Desktop stand on parent unit
The parent unit comes with a desktop stand attached to the back of
the unit. To place the parent unit on a desk, simply pull out the stand
as shown above.
NOTE
Place the parent unit on a flat, even surface.
2.4 Powered by portable battery on baby unit
1. Insert the power plug of portable battery pack into the DC jack
on the back of baby unit as shown.
2. Switch the POWER button to the ON position to turn the Battery
Pack on, the ON/OFF indicator lights in green and the Baby Unit
is powered on.
3. The Battery Level indicator lights in red when battery is low,
connect power supply and keep for full charging.
NOTE
The battery is not a user-accessible item. Please contact the helpline
if you think it needs replacing.
12
The Portable battery is assembled with
a built-in rechargeable battery pack
(Ni-MH battery 3.6V, 600mAh) to
give up to 4 hours monitor operation
without power connection, please
charge the unit at least 16 hours for the
first time use.
Getting Started
Advertisement
Table of Contents
