The devices of the TFK02 series should not be used as sole monitoring devices in order to detect or even avoid dangerous operating states in plants or machines. Machinery and plant need to be designed in such a manner that faulty conditions and malfunctions do not arise that could pose a safety risk for operators.
Qualified Personnel The TFK02 devices may only be installed by trained, qualified personnel who are able to mount the devices correctly. Qualified personnel are persons, who are familiar with assembling, installation, placing in service and operating these devices and who are suitably trained and qualified.
The prerequisite for the type of connection is three identical connecting cables, preferably three cores of the same cable. The 4-wire circuit compensates all errors that can occur due to lead resistance. • TFK02 Instruction manual 12/2019 page 4...
We recommend an inspection interval of 2 years. The calibration period is determined individually by the user and depends on the intensity of use. If inadmissible deviations (defined by the customer) occur during recalibration, the recalibration period must be shortened. TFK02 Instruction manual 12/2019 page 5...
Page 6
The use of the angle plug according to DIN EN 175301-803 is advantageous. 20190124 PKP Prozessmesstechnik GmbH +49 (0) 6122-7055-0 • T +49 (0) 6122 7055-50 Borsigstr. 24 • D-65205 Wiesbaden info@pkp.de • www.pkp.de...
Page 7
Thermowell reduced to 3 mm diameter for faster response times. Only for versions with fixed screw connection and ther- mowell diameter 6 mm. +49 (0) 6122-7055-0 • T +49 (0) 6122 7055-50 PKP Prozessmesstechnik GmbH Borsigstr. 24 • D-65205 Wiesbaden info@pkp.de • www.pkp.de...