Troubleshooting - Philips 230W5VS User Manual

Troubleshooting

Troubleshooting
• Safety and
Troubleshooting
• FAQs
This page deals with problems that can be corrected by the user. If the problem still persists after you have
• Common
tried these solutions, contact your nearest Philips dealer.
Problems
• Imaging
Common Problems
Problems
• Regulatory
Information
Having this problem?
• Other Related
Information
No Picture
(Power LED not lit)
No Picture
(Power LED is amber or yellow)
Screen says
AUTO button not working properly
Imaging Problems
Display position is incorrect
file:///D|/My%20documents/dfu/230W/english/230w5/safety/saf_troub.htm (1 of 3) [4/27/2004 2:40:31 PM]
Check these items
Make sure the power cord is plugged into the
power outlet and into the back of the monitor.
First, ensure that the power button on the
front of the monitor is in the OFF position,
then press it to the ON position.
Make sure the computer is turned on.
Make sure the signal cable is properly
connected to your computer.
Check to see if the monitor cable has bent
pins.
The Energy Saving feature may be activated
Make sure the monitor cable is properly
connected to your computer. (Also refer to
the Quick Set-Up Guide).
Check to see if the monitor cable has bent
pins.
Make sure the computer is turned on.
The Auto Function is designed for use on
standard Macintosh or IBM-compatible PCs
running Microsoft Windows.
It may not work properly if using nonstandard
PC or video card.
The AUTO adjustment does not function
when digital input is used for display.
Press the Auto button.
Adjust the image position using the
Horizontal Position and/or Vertical Position in
OSD Main Controls.