Table of Contents
Advertisement
Drive specification*
Altitude, operating
Altitude, non-operating
(below mean sea level, max)
Operational Shock (2 ms - typical)
Non-Operational Shock (2 ms- typical)
Vibration, operating
Vibration, non-operating
Drive acoustics, sound power (bels)
Idle***
Performance seek
Non-recoverable read errors
Annualized Failure Rate (AFR)
Rated Workload
Warranty
Load-unload cycles
Supports Hotplug operation per
Serial ATA Revision 3.2 specification
*
All specifications above are based on native configurations.
**
One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
***
During periods of drive idle, some offline activity may occur according to the S.M.A.R.T.
specification, which may increase acoustic and power to operational levels.
†
Seagate does not recommend operating at sustained case temperatures above 60°C.
Operating at higher temperatures will reduce useful life of the product.
Seagate IronWolf Serial ATA Product Manual, Rev. D
ST12000VN0007 & ST10000VN0004
Maximum rate of 180TB/year.
Workloads exceeding the annualized rate may degrade the drive MTBF and impact product reli-
ability. The Annualized Workload Rate is in units of TB per year, or TB per 8760 power on hours.
Workload Rate = TB transferred * (8760 / recorded power on hours).
To determine the warranty for a specific drive, use a web browser to access the following web
page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase.The
system will display the warranty information for the drive.
–304.8 m to 3,048 m
(–1000 ft to 10,000+ ft)
–304.8 m to 12,192 m
(–1000 ft to 40,000+ ft)
Read 70 Gs / Write 40 Gs
250 Gs
5–22 Hz:
0.25 Gs, Limited displacement
22–350 Hz: 0.50 Gs
350–500 Hz: 0.25 Gs
2–500 Hz: 2.27 Grms ref
2.8 (typical)
3.0
(max)
3.2 (typical)
3.4
(max)
15
1 sector per 10
bits read
0.87% based on 8760 POH
600,000
Yes
7
Advertisement
Table of Contents
