Table of Contents
Advertisement
2.6
nvironmental limits
E
Temperature and humidity values experienced by the drive must be such that condensation does not occur on any
drive part. Altitude and atmospheric pressure specifications are referenced to a standard day at 58.7°F (14.8°C).
To maintain optimal performance drives should be run at nominal drive temperatures and humidity.
Seagate does not recommend operating at sustained extreme temperatures.
Operating at higher temperatures will reduce useful life of the product
Caution
See
Section 2.11, "Reliability"
2.6.1
Temperature
a. Operating
32°F to 149°F (0°C ambient to 65°C drive reported) temperature range with a maximum temperature gradient of 36°F
(20°C) per hour.
The maximum allowable drive reported temperature is 149°F (65°C).
Air flow may be required to achieve consistent nominal drive temperature values (see
required cooling is provided for the electronics and HDA, place the drive in its final mechanical configuration, and
perform random write/read operations. After the temperatures stabilize, monitor the current drive temperature using
the SMART temperature attribute 194 or Device Statistics log 04h page 5.
b. Non-operating
–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification
assumes that the drive is packaged in the shipping container designed by Seagate for use with drive.
HDA
Temperature
Check Point
Figure 2.
Location of the HDA temperature check point
Image is for reference only, may not represent actual drive
Note
2.6.2
Humidity
The values below assume that no condensation on the drive occurs. Maximum wet bulb temperature is 84.2°F (29°C).
2.6.2.1
Relative humidity
Operating:
5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.
Non-operating:
5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.
2.6.3
Effective Altitude (sea level)
Operating:
–304.8 m to 3048 m (–1000 ft. to 10,000+ ft.)
Non-operating:
–304.8 m to 12,192 m (–1000 ft. to 40,000+ ft.)
Seagate SkyHawk AI Serial ATA Product Manual, Rev. B
for rated MTBF device operating condition requirements.
Section
3.4). To confirm that the
12
Advertisement
Table of Contents
