Safety Standard Compliance Symbols And Descriptions - Epson ELPDC30 User Manual

Safety Standard Compliance Symbols and Descriptions

The following table lists the meaning of the safety symbols labeled on the
equipment.
Approved
No. Symbol mark
standards
A IEC60417
No.5007
B
IEC60417
No.5008
C IEC60417
No.5009
D ISO7000
No.0434B
IEC3864-B3.1
E IEC60417
No.5041
F IEC60417
No.6042
ISO3864-B3.6
G
IEC60417
No.5957
H IEC60417
No.5926
Explanation
"ON" (power)
To indicate connection to the mains.
"OFF" (power)
To indicate disconnection from the
mains.
Stand-by
To identify the switch or switch position
by means of which part of the equipment
is switched on in order to bring it into
the stand-by condition.
Caution
To identify general caution when using
the product.
Caution, hot surface
To indicate that the marked item can be
hot and should not be touched without
taking care.
Caution, risk of electric shock
To identify equipment that has risk of
electric shock.
For indoor use only
To identify electrical equipment designed
primarily for indoor use.
Polarity of d.c. power connector
To identify the positive and negative
connections (the polarity) on a piece of
equipment to which a d.c. power supply
may be connected.
Approved
No. Symbol mark
standards
I
IEC60417
No.5001B
J IEC60417
No.5002
K IEC60417
No.5019
L IEC60417
No.5017
M IEC60417
No.5032
N IEC60417
No.5031
O IEC60417
No.5172
P
ISO 3864
60
Explanation
Battery, general
On battery powered equipment. To
identify a device for instance a cover for
the battery compartment, or the
connector terminals.
Positioning of cell
To identify the battery holder itself and
to identify the positioning of the cell(s)
inside the battery holder.
Protective earth
To identify any terminal which is
intended for connection to an external
conductor for protection against electric
shock in case of a fault, or the terminal of
a protective earth electrode.
Earth
Indicates a grounding port when No.11 is
not explicitly called for.
Alternating current
To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
Direct current
To indicate on the rating plate that the
equipment is suitable for direct current
only; to identify relevant terminals.
Class II equipment
To identify equipment meeting the safety
requirements specified for Class II
equipment according to IEC 61140.
General prohibition
To identify actions or operations that are
prohibited.